Solenoid valve PGA

Description

Solenoid valve PGA

Ref. PGA Series

Plastic globe and angle valves. The toughest, most reliable valves in their class

Built for high-end residential and light commercial applications, Rain Bird® PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty. Because you care about your reputation—and so do we.

Technical characteristics

Solenoid valve PGA

Ref. PGA Series

Features	Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions Robust construction and electrical design for quiet performance you can count on Filtered pilot flow to resist debris and clogging Slow closing to prevent water hammer and subsequent system damage Normally closed, forward flow design Accepts latching solenoid for use with Rain Bird battery-operated controllers Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service Three-year trade warranty Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance Accepts latching solenoid for use with Rain Bird battery-operated controllers Options Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance. Regulates up to 100 psi (6.9 bar) Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,35 bar) Compatible with ESP-LXD and ESP-LXIVM decoders
Specs	Pressure: 15 to 150 psi (1.04 to 10.4 bar) Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m3/h; 7.8 to 568 l/m) Flow with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m3/h; 19.2 to 568 l/m) Water temperature: Up to 110° F (43° C) Ambient temperature: Up to 125° F (52° C) 24VAC 50/60Hz (cycles/sec) solenoid power requirement Inrush current: 0.41A (9.9VA) at 50/60Hz Holding current: 0.14A (3.43VA) at 50/60Hz Solenoid coil resistance: 30-39 Ohms, nominal
Dimensions	Height x Length x Width 100-PGA: 7 1⁄4" (18.4 cm) x 5 1⁄2" (14.0 cm) x 3 1⁄4" (8.3 cm) 150-PGA: 8" (20.3 cm) x 6 3⁄4" (17.2 cm) x 3 1⁄2" (8.9 cm) 200-PGA: 10" (25.4 cm) x 7 3⁄4" (19.7 cm) x 5" (12.7 cm)
Model	100-PGA: 1” NPT 150-PGA: 1.5” NPT 200-PGA: 2” NPT

Description

Technical characteristics

Related Documents

Related products