Vector Smart Object2 copy 2



Rain Bird has produced and offered the industry’s broadest range of irrigation products for landscape, agriculture and, golf, sports field, private and public projects.

150 PGA Angle
150 PGA Angle 200 PGA – 15 Angle PGA cutaway PGA150 Top Down PGA-Install_1555 slider100 PGA Hero

PGA Series



  • Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
  • Robust construction and electrical design for quiet performance you can count on.
  • Rugged PVC and glass-filled nylon construction for reliable operation.
  • Normally closed, forward flow design.
  • Filtered pilot flow to resist debris and clogging.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Three-year trade warranty.

Ease of Use

  • Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance.*
  • Globe and angle configuration for flexibility in design and installation.
  • Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Non-rising flow control handle adjusts water flow as needed.

*Currently available on 2” PGA models only.


  • Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
  • Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1″ and 1½”); PGA-NP-HAN2 (2″).


  • Pressure: 15 to 150 psi (1,04 to 10,4 bar).
  • Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m³/h; 7.8 to 568 l/m).
  • Flow with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m³/h; 19.2 to 568 l/m).
  • Water temperature: Up to 110°F (43°C) – Refer to chart in photo section above.
  • Ambient temperature: Up to 125°F (52°C).

Electrical Specifications

  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement.
  • Inrush current: 0.41A (9.9VA) at 60Hz.
  • Holding current: 0.14A (3.43VA) at 60Hz.
  • Solenoid coil resistance: 30-39 Ohms, nominal.


  • 100-PGA: 7¼” x 5½” x 3¼” (18,4 cm) x (14,0 cm) x (8,3 cm).
  • 150-PGA: 8″ x 6¾” x 3½” (20,3 cm) x (17,2 cm) x (8,9 cm).
  • 200-PGA: 10″ x 7¾” x 5″ (25,4 cm) x (23,5 cm) x (12,7 cm).

Note: The PRS-D option adds 2″ (5,1 cm) to the valve height.

Related Documents