Vector Smart Object2 copy 2

(0)

300-BPES

Features

  • Unique hybrid construction featuring durable red brass body and glass-filled nylon bonnet for long life at a value price.
  • Globe and angle configuration for flexibility in design and installation.
  • Normally closed, forward flow design.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Robust solenoid provides dependable performance even during constant operation.
  • Flow control handle adjusts water flows as needed and incorporates a brass thread insert for longer life.
  • Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning the valve on at the controller.
  • Manual external bleed permits flushing debris from the system. Recommended for system start up and repairs.
  • Highly efficient operation with extremely low pressure loss.
  • Patented nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging.
  • Three-year trade warranty.

Options

  • Accommodates field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
  • Purple flow control handle for non-potable water applications (BPE-NP-HAN).
  • Latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,4 bar).

Specs

  • Pressure: 20 to 200 psi (1,4 to 13,8 bar).
  • Flow with/without PRS-D option: 60 to 300 gpm (13,6 to 68,1 m³/h; 3,78 to 18,90 l/s).
  • Temperature: up to 140°F (60°C).
  • Power: 24 VAC 50/60Hz (cycles per second) solenoid.
  • Inrush current: 0.41A (9.8VA) at 60Hz.
  • Holding current: 0.28A (6.7VA) at 60Hz.
  • Coil resistance: 28 Ohms, nominal

Dimensions

  • Height: 13 5/8″ (34,61 cm).
  • Length: 8″ (20,32 cm).
  • Width: 7″ (17,78 cm).

Note: PRS-D option adds 2″: (5,1 cm) to the valve height.

Models

  • 300-BPES: 3′ (80/90).

BS threads available; specify when ordering.

Recommendations

  1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft/sec (2.29 m/s) in order to reduce the effects of water hammer.
  2. For flows below 5 gpm (1.14 m³/h; 19.2 l/m), Rain Bird recommends use of upstream filtration to prevent debris from collection below the diaphragm.
  3. For flows below 10 gpm (2.27 m³/h; 37.8 l/m), Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

Related Documents

rain-bird

Rain Bird has produced and offered the industry’s broadest range of irrigation products for landscape, agriculture and, golf, sports field, private and public projects.

Home Our Products Our Services
Rain Bird Catalog Water saving PROJECT Why using Rain bird automatic irrigation system?
About Us Vector Smart Object2 copy 2 Cart (0)
bpes_with_prs-dial_-_hero
bpes_with_prs-dial_-_hero bpes_cutaway

300-BPES

Features

  • Unique hybrid construction featuring durable red brass body and glass-filled nylon bonnet for long life at a value price.
  • Globe and angle configuration for flexibility in design and installation.
  • Normally closed, forward flow design.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Robust solenoid provides dependable performance even during constant operation.
  • Flow control handle adjusts water flows as needed and incorporates a brass thread insert for longer life.
  • Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning the valve on at the controller.
  • Manual external bleed permits flushing debris from the system. Recommended for system start up and repairs.
  • Highly efficient operation with extremely low pressure loss.
  • Patented nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging.
  • Three-year trade warranty.

Options

  • Accommodates field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
  • Purple flow control handle for non-potable water applications (BPE-NP-HAN).
  • Latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,4 bar).

Specs

  • Pressure: 20 to 200 psi (1,4 to 13,8 bar).
  • Flow with/without PRS-D option: 60 to 300 gpm (13,6 to 68,1 m³/h; 3,78 to 18,90 l/s).
  • Temperature: up to 140°F (60°C).
  • Power: 24 VAC 50/60Hz (cycles per second) solenoid.
  • Inrush current: 0.41A (9.8VA) at 60Hz.
  • Holding current: 0.28A (6.7VA) at 60Hz.
  • Coil resistance: 28 Ohms, nominal

Dimensions

  • Height: 13 5/8″ (34,61 cm).
  • Length: 8″ (20,32 cm).
  • Width: 7″ (17,78 cm).

Note: PRS-D option adds 2″: (5,1 cm) to the valve height.

Models

  • 300-BPES: 3′ (80/90).

BS threads available; specify when ordering.

Recommendations

  1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft/sec (2.29 m/s) in order to reduce the effects of water hammer.
  2. For flows below 5 gpm (1.14 m³/h; 19.2 l/m), Rain Bird recommends use of upstream filtration to prevent debris from collection below the diaphragm.
  3. For flows below 10 gpm (2.27 m³/h; 37.8 l/m), Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

Related Documents

300-BPES

Vector Smart Object2 copy 2 Add To Cart

300-BPES

Vector Smart Object2 copy 2 Add To Cart